28 Dec 09

1. MATERIAL:SILICON ELASTOMER OF NON EXOTHERMIC 2. TYPE :TWO PARTS (BASE / CURING AGENT) 3. QUANTITY required for Visakhapatnam Steel Plant:300 Kgs 4. PHYSICAL PROPERTIES:FLOWABLE LIQUID CURES TO FLEXIBLE ELASTOMER 5. VISCOSITY AT 25 DEG.CENT:2900 - 3000 CENTIPOISE 6. SP.GRAVITY AT 25 DEG.CENT:1.33 - 1.37 7. DUROMETER HARDNESS:40 - 45 SHORE A 8. THERMAL CONDUCTIVITY: 8.0 - 10.0 X 10 POWER (-4) CAL/CM SEC DEG.CENT 9. LINEAR COEFFICIENT OF THERMAL EXPANSION:270 PPM 10. VOLUME RESISTIVITY: 3.1 X 10 POWER (13) OHM-CM (APPROX) 11. CURE TIME AT 25 DEG.CENT: 8 - 24 HRS IRRESPECTIVE OF THE THICKNESS/DEPTH WHILE POTTING 12. CURE TIME AT 100 DEG.CENT: 5 - 10 MIN 13. DIELECTRIC STRENGTH: 450 - 480 V/MIL 14. WORKING TIME: >=15 MINUTES 15. TEMPERATURE STABILITY: SUITABLE FOR TEMPERATURES > 250 DEG CENT. 16. M S D S: MATERIAL SAFETY DATA SHEET TO BE SUPPLIED ALONG WITH THE MATERIAL 17. SHELF LIFE:MINIMUM 12 MONTHS FROM DATE OF RECEIPT AT VSP 18. REVERSION RESISTANT: AT > 200 DEG.CENT ALSO WHEN HEATED UNDER CONFINEMENT OR IN DEEP SECTION. IT SHOULD NOT DEPOLYMERIZE OR REVERT TO A MORE LIQUID STATE. 19. TC REQUIRED: FOR VISCOSITY,SP.GRAVITY,DUROMETER HARDNESS,CONDUCTIVITY,VOLUME RESISTIVITY, AND DIELECTRIC STRENGTH. 20. TECHNICAL DOCUMENTATION TO SUPPORT THE SPECIFICATION SHALL BE PROVIDED FROM THE ORIGINAL MANUFACTURER ALONG WITH THE OFFER.

16 Dec 09

PLASTÝC ÝNJECTÝON MACHÝNE 100 150 200 250 300 350 TON PRÝCE DETAÝLS

13 Nov 09

tyre tube flaps

08 Nov 09

I want nylon net for making nylon cleaning scrubbers and body loofah.

20 Oct 09

I AM LOOKING FOR SUPPLIERS OF VARIOUS TRPES OF RUBBER SHEET AND CONVEYOR BELTING